Fine pitch electro magnetic chuck is a type of magnetic workholding device. Can be used for surface grinder machine, tool grinding machine and electromachine etc. Able to suck magnetic conductivity materials, the suction force is well-distributed and with high processing accuracy. It’s suitable for processing small workpieces. Quality Standards:ISO9001-2000 quality management system Fine pitch electro magnetic chuck electromagnetic chuck
Item code |
Length |
Width |
Chuck Height |
Panel Height |
Pole Pitch |
Current |
Power |
Net Weight |
X11M 200×400 |
400 |
200 |
110 |
26 |
4(3+1) |
1 |
110 |
65 |
X11M 200×460 |
460 |
200 |
110 |
26 |
4(3+1) |
1.2 |
132 |
70 |
X11M 200×500 |
500 |
200 |
110 |
26 |
4(3+1) |
1.3 |
143 |
80 |
X11M 200×560 |
560 |
200 |
110 |
26 |
4(3+1) |
1.5 |
165 |
95 |
X11M 200×610 |
610 |
200 |
100 |
26 |
4(3+1) |
1.5 |
165 |
90 |
X11M 200×630 |
630 |
200 |
120 |
26 |
4(3+1) |
2 |
220 |
110 |
X11M 250×500 |
500 |
250 |
110 |
26 |
4(3+1) |
1.6 |
176 |
100 |
X11M 250×600 |
600 |
250 |
120 |
26 |
4(3+1) |
1.8 |
198 |
120 |
X11M 300×500 |
500 |
300 |
120 |
26 |
4(3+1) |
1.8 |
198 |
120 |
X11M 300×600 |
600 |
300 |
110 |
26 |
4(3+1) |
2 |
220 |
135 |
X11M 300×610 |
610 |
300 |
100 |
26 |
4(3+1) |
2 |
220 |
115 |
X11M 300×680 |
680 |
300 |
120 |
26 |
4(3+1) |
3 |
330 |
150 |
X11M 300×800 |
800 |
300 |
120 |
26 |
4(3+1) |
3.5 |
385 |
175 |
X11M 300×1000 |
1000 |
300 |
120 |
26 |
4(3+1) |
4 |
440 |
210 |
X11M 400×610 |
610 |
400 |
100 |
26 |
4(3+1) |
2.5 |
275 |
150 |
X11M 400×690 |
690 |
400 |
100 |
26 |
4(3+1) |
2.8 |
308 |
170 |
X11M 320×1000 |
1000 |
320 |
120 |
26 |
4(3+1) |
4 |
440 |
220 |
X11M 320×1250 |
1250 |
320 |
120 |
26 |
4(3+1) |
4.8 |
528 |
270 |
X11M 300×800 |
800 |
300 |
120 |
26 |
4(3+1) |
3 |
330 |
175 |
X11M 300×1000 |
1000 |
300 |
120 |
26 |
4(3+1) |
3.2 |
352 |
210 |
This table is for reference only, due to continued development and improvement in the product, the company reserves the right to change design specifications
1. The Electromagnetic chuck should be supplied with rated voltage of 110 volts DC power. The rectifier and control device is already equiped in the host electrical equipment if used on grinding machine. If use alone can select sets of rectifying device directly. 2. For the safe operation, before installing and using must be measure insulation resistance between coil and grounding wire,it should not less than 500 MΩ measured by 500V megger. 3. There must be a cooling liquid under the condition of grinding,to avoid the workpieces so overheated that influence the precision of the working surface,or lead to burn out the coil. 4. The contact surface between the workpiece and the panel should not less than one pole pitch, in order to make full use of the chuck’s magnetic force. 5. After the chuck fixed on the machine,should self grinding one time to ensure the accuracy. If the working surface change rough or magnetic force decreased, can self grinding the working surface to ensure that the magneitc force will not decline.
Whether you have a question about details, pricing, or anything else, our team is ready to answer all your questions.
Subscribe to our newsletter to keep up to date with our latest news and to receive product updates, discounts and exclusive offers.